Help
I just purchased a Farmall A, it appeared the engine had ceased. I removed the spark plugs to find water in #2 cylinder. I turned over the engine and sprayed oil in the cylinders, but the #2 cyl. keeps spitting water. Any suggestions on this would be greatly appreciated?
Page 1 of 1
Engine Problems Water in cylnder
#1
- Newbie
-
- Group: Posting Member
- Posts: 1
- Joined: 10-September 04
Posted 13 September 2004 - 10:25 PM
#2
- Newbie
-
- Group: Posting Member
- Posts: 3
- Joined: 23-July 10
Posted 23 July 2010 - 05:40 PM
TREE, on 13 September 2004 - 10:25 PM, said:
I just purchased a Farmall A, it appeared the engine had ceased. I removed the spark plugs to find water in #2 cylinder. I turned over the engine and sprayed oil in the cylinders, but the #2 cyl. keeps spitting water. Any suggestions on this would be greatly appreciated?
I'm Afraid you have a Blown Head Gasket...that's why the water/antifreeze is getting in. Hopfully it's just the gasket and the head isn't warped but removing the head & replaciong the gasket is not a big deal at all. Once you have the head off you can check out all the other cylinders as well. Good Luck, DanO
Share this topic:
Page 1 of 1