Posted September 13 2004 - 10:25 PM
Posted July 23 2010 - 05:40 PM
I just purchased a Farmall A, it appeared the engine had ceased. I removed the spark plugs to find water in #2 cylinder. I turned over the engine and sprayed oil in the cylinders, but the #2 cyl. keeps spitting water. Any suggestions on this would be greatly appreciated?
I'm Afraid you have a Blown Head Gasket...that's why the water/antifreeze is getting in. Hopfully it's just the gasket and the head isn't warped but removing the head & replaciong the gasket is not a big deal at all. Once you have the head off you can check out all the other cylinders as well. Good Luck, DanO
"Life is a Short Trip, You Don't Need Baggage," D.O'C.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users