Jump to content


Please visit Our Sponsors



If you have never posted before on the board your first post will not show until approved by an admin and you will be changed to a Posting Member so you can post without prior approval. This is done to control the spammers that try to spam forums.

Photo

Engine Problems


  • Please log in to reply
1 reply to this topic

#1 TREE

TREE

    Newbie

  • Posting Member
  • Pip
  • 1 posts

Posted September 13 2004 - 10:25 PM

I just purchased a Farmall A, it appeared the engine had ceased. I removed the spark plugs to find water in #2 cylinder. I turned over the engine and sprayed oil in the cylinders, but the #2 cyl. keeps spitting water. Any suggestions on this would be greatly appreciated?

#2 DanO

DanO

    Newbie

  • Posting Member
  • Pip
  • 5 posts

Posted July 23 2010 - 05:40 PM

I just purchased a Farmall A, it appeared the engine had ceased. I removed the spark plugs to find water in #2 cylinder. I turned over the engine and sprayed oil in the cylinders, but the #2 cyl. keeps spitting water. Any suggestions on this would be greatly appreciated?



I'm Afraid you have a Blown Head Gasket...that's why the water/antifreeze is getting in. Hopfully it's just the gasket and the head isn't warped but removing the head & replaciong the gasket is not a big deal at all. Once you have the head off you can check out all the other cylinders as well. Good Luck, DanO

"Life is a Short Trip, You Don't Need Baggage,"       D.O'C.





0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users