Jump to content

Please visit Our Sponsors

If you have never posted before on the board your first post will not show until approved by an admin and you will be changed to a Posting Member so you can post without prior approval. This is done to control the spammers that try to spam forums.


Splitting A "c"

  • Please log in to reply
No replies to this topic

#1 Efarm



  • Members
  • Pip
  • 1 posts

Posted September 25 2010 - 09:59 PM

Hello Folks; I am hoping to get some information on splitting a "C". Under the torque tube I have an access hole for the clutch linkage and a smaller hole just towards the rear of the clutch linkage access. In the smaller access hole I can see a nut apparently threaded onto a bolt or stud but can not see anything more. Can someone let me know what this is for? I want to split the tractor at the torque tube and the tranny to stop a transmission oil leak which shows up at the small access hole. Thanks to all in advance!

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users