Jump to content


Please visit Our Sponsors



If you have never posted before on the board your first post will not show until approved by an admin and you will be changed to a Posting Member so you can post without prior approval. This is done to control the spammers that try to spam forums.

Photo

"c" Air Cleaner Oil Cup Replacement Part


  • Please log in to reply
No replies to this topic

#1 Hodgeman82

Hodgeman82

    Newbie

  • Posting Member
  • Pip
  • 1 posts

Posted July 09 2012 - 10:36 PM

Hi,

The clamp on my air cleaner oil cup must have loosened over time causing the cup to drop off while I was mowing my lawn. BANG! - went right under my belly mower and was destroyed, along with the clamp. Now I am in need of a replacement but everything I see online is not matching up to what my cleaner cup used to look like. The original had a cup within the cup with holes near the top of the inner cup. The inner cup fit around a short tube/pipe decending from the air filter assembly. The replacement cups I'm seeing online for a Farmall C don't have that inner cup - only the outer/main bowl. However, the dimensions match: 4 3/4" OD at outer lip and 4 7/16 inside diameter. Is that inner cup necessary? Did they do away with it on replacement parts? I still see it for the Farmall A,B,H and other models but the dimensions of those cups don't match my original part. Any help would be very much appreciated before I end up buying the wrong part.

Thanks!




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users