Jump to content


Please visit Our Sponsors
East Coast Discounts   East Coast Discounts
If you have never posted before on the board your first post will not show until approved by an admin and you will be changed to a Posting Member so you can post without prior approval. This is done to control the spammers that try to spam forums.

Photo

56 Loboy Headlight Wiring


  • Please log in to reply
No replies to this topic

#1 darrelln

darrelln

    Newbie

  • Posting Member
  • Pip
  • 1 posts

Posted July 08 2016 - 10:40 AM

I have a 56 loboy, 6 volt positive ground and I am hooking up the headlights, there are 2 wires coming out of the hood on each side, so I hooked 1 to the light terminal and 1 to ground , blew the fuse, took the ground 1 off and the lights work, grounded thru the mounting, why is there 2 wires when lights only appear to need 1 to work, should I hook both of them to the light terminal or just leave 1 off.  thanks Darrell






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users