Jump to content


Please visit Our Sponsors
East Coast Discounts   East Coast Discounts
If you have never posted before on the board your first post will not show until approved by an admin and you will be changed to a Posting Member so you can post without prior approval. This is done to control the spammers that try to spam forums.

Photo

No Spark


  • Please log in to reply
No replies to this topic

#1 CDrake

CDrake

    Newbie

  • Posting Member
  • Pip
  • 1 posts

Posted May 20 2013 - 11:17 PM

I was having problems with my Cub stalling out. I switched carbs but that was not the problem. So I replaced plugs, wires, points ,condenser. Now, I get spark at the points, but none at the plugs.

Before I would get ignition, and now none. I did not replace either the rotor or the distributor. But at least before I got ignition.

Any suggestions?

Thanks in advance,

Charlie Drake, Potomac, MD




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users